So, um, remember that woodworking class I take sometimes? Class has actually been in session since September but with all the craziness of getting ready for our trip to Korea I didn't get a chance to post any pictures of my progress (Also, I forgot to take my camera to class a few times which didn't help.)
So to refresh your memory: I'm in the middle of building a spice cabinet with a rather fancy door. (Here are updates 1, 2, 3, and 4.) Here's some of what I've done so far this semester.
Glued the diamond panel into the middle of the door and trimmed the edges of the door to size. Hand sanded the door, the cabinet box, and the cabinet backing.
It took about an hour and a half to do a good job on the sanding. First I sanded everything with 80 grit, then 100, 120, 150, and 180. By the time I was finished my hand was numb and cramped. But if you don't sand thoroughly sometimes you'll see track marks after you apply lacquer to your project but by then you can't do anything about it. I've put in so much time on this cabinet that I was going to make sure I did a decent job on the sanding.
Glued strips of solid mahogany onto the front edge of the shelves. After I stuck the strips on with glue a used an air gun to tack the strips down with tiny little pin nails.
The strips will give the shelves some stability and to provide a lip so the spice bottles won't slide off the shelves. I also think it looks better.
The cabinet box and backing. The backing will be glued on after the cabinet has been sprayed with lacquer.
I didn't get any pictures of it but this last week my wonderfully understanding instructor sprayed the cabinet door, box, and backing with several coats of lacquer for me. Going in the spray room and breathing in the fumes is a no-go for me since I'm pregnant right now so I really appreciated his help.
Next week I'll glue on the back of the cabinet and install the hinges. We only have two weeks left of class but I think I'll also be able to finish up a Christmas present I'm making for my dad. I have pictures of it in progress but I'll probably post them after Christmas so as not to ruin the surprise.
Labels: projects, woodworking